3DBeam - modelling and analysis of 3D beam structures
The 3DBeam tool is used for efficient modelling and analysis of 3D beam structures.
Crankshaft Fatigue
Calculation of safety against fatigue failure in diesel engine crankshafts and safety against slippage for semi built crankshafts.
Cutres - verification of sectional forces
Cutres is an interactive postprocessor for presenting forces and stress distribution in user-defined cross sections (cuts) through previously defined FE models.
DeepC - improved confidence in deep water concepts
DeepC - improved confidence in deep water concepts. Optimum conditions for moorings, risers and marine operations
DNV Navigator
A tool to meet the increasing number of regulations, requirements and demand for ship-to-shore reporting
Emergency Response Planning
Our Emergency Response Planning Philosophy: The most critical aspects of an effective emergency response planning strategy are pre-planning and training.
Framework - fatigue and earthquake analysis
Framework is an interactive postprocessor for code checking, fatigue and earthquake analysis of frame models. All phases throughout the life cycle of the structures are covered: from initial design to re-qualification.
Gear Faceload and Rating
Calculation of contact stresses, scuffing, fatigue capacity and face load distribution in marine reduction gears.
GeniE - ingenious product modelling and analysis
GeniE is a product based on conceptual modelling and analysis of offshore structures providing a basis for life cycle product management. These techniques are proven to save cost and to increase quality.
GeniE.Lite - inGeniousEngineering
GeniE.Lite is a tool for design of regular steel structures made up of beams and plates. It is based upon the use of concepts to represent the physical structure and loads that it supports.
GeniE Wind
GeniE Wind for offshore structures - software for ultimate strength and fatigue analysis of offshore wind turbine structures
Hull Integrity
Nauticus Hull Intergrity enables ship operators to improve overall control of their fleet’s conditions by optimising inspection, repair management and hull maintenance.
HydroD
Hydrodynamic design of floating structures. HydroD has been developed to help engineers become much more productive, and at the same achieve a higher degree of quality when performing hydrodynamic analysis.
Installjac - launching and upending of jackets
Installjac - a state of the art time domain program that performs an accurate simulation of the installation process of an offshore steel-piled jacket. Both the launch and up-ending scenarios are accounted for.
Leak - calculate leak frequency
An established technical failure frequency database to calculate leak frequency in process equipment and manage your risk.
Maros
Upstream performance forecasting. Maros is an advanced RAM tool with extensive features for modelling networks, maintenance, operations, and demand scenarios.
Mimosa - interactive static and dynamic mooring system analysis
A market leader in mooring analysis. Mimosa offers a variety of options such as calculation of the vessel’s wave-frequency and low-frequency motions and mooring line tensions.
Orbit Inspector - inspection task list generator
A comprehensive inspection optimisation software tool for the maintenance and operation of offshore drilling and production facilities.
Orbit Launcher - qualitative risk based inspection
A screening tool for risk based inspection. Orbit Launcher allows you to enter equipment items, specify thinning susceptibility and choose the extent of the consequences.
Orbit Offshore - quantitative risk based inspection
A comprehensive inspection optimisation software tool for the maintenance and operation of offshore drilling and production facilities.
Orbit Onshore - quantitative risk based inspection
A comprehensive inspection optimisation software tool for the maintenance and operation of onshore chemical and petrochemical facilities.
Orbit+ EAM
a comprehensive management tool to allow Asset Integrity Management, focusing on maintenance, parts, inspection and risk management.
Orbit+ IDS
a methodical inspection strategy and support tool to optimize resource usage without compromising safety and availability.
Orbit+ MMS
By providing the industrial knowledge for maintenance and failure analysis, the key performance indicators (KPIs) such as MTBF, MTTR and MTA can be monitored.
Orbit+ TEAMS
suite of integrated software and management system solutions designed to serve the needs of commercial tank terminals, by facilitating the management of all aspects of this business.
Patran-Pre - CAE modelling and FE pre-processing
Patran-Pre lets you model, develop and test a product using computer-based simulation and thereby reducing or eliminating costly prototyping and testing.
Phast
A comprehensive hazard analysis software tool for all stages of design and operation. Risks may then be reduced by re-design of the process or plant, modification to existing operational procedures, or by implementing other mitigation measures.
Phast Risk - onshore QRA software system
A user-friendly, industry standard method for carrying out Quantitative Risk Assessments (QRA) of onshore process, chemical and petrochemical facilities.
Platework - plate analysis postprocessor
Platework - an interactive program for code checking of plane stiffened steel plate structures based on results from FE analysis
Postresp - statistical response calculation
Postresp is a graphical postprocessor for statistical processing and presentation of response in frequency and time domain
Presel - superelement analysis
Presel efficiently assembles the superelements created by the Sesam preprocessors to form a complete model of a structure.
Proban - probabilistic analysis
contains state-of-the-art computational methods needed to perform sensitivity, reliability and probability distribution analysis for components and systems.
Profast - probabilistic fatigue analysis
Profast is designed for planning of cost-efficient inspection of offshore jacket structures and re-qualification of existing structures. Profast can also be used for other types of structures where fatigue crack growth is considered.
PULS - buckling checks for stiffened plate elements and shells
The buckling assessment package PULS is tailored for buckling strength evaluation of ship and offshore structures.
Riflex - non-linear structural analysis of risers and moorings
Rifles is a tailor-made and advanced tool for static and dynamic analysis of slender marine structures.
RiskSpectrum® Family - fault and event tree analysis
The RiskSpectrum® family of products enables you to successfully satisfy all your fault and event tree analysis requirements with the best system on the market.
Shaft alignment
Calculation of bearing loads, moments and stresses for shaft alignment on marine propulsion plants.
Sesam Structure Integrity
Manage the structural integrity of offshore assets with Sesam Structure Integrity software, based on DNV’s in-depth knowledge of life cycle management and engineering services related to offshore structures.
Sestra - linear structural analysis
The most rapid and robust of finite-element solvers. Sestra is a general-purpose FE program for linear structural analysis.
SilverPipe
Take control from well to terminal with SilverPipe, the software that enables safe and efficient pipeline operations, documents risk, and gives a clear overview of the integrity of pipelines, components and tanks.
Simo - non-linear single body time domain motion analysis
Simulation of marine operations. Simo is a time domain simulation program for study of motions and station keeping of multibody systems.
Splice - soil and pile analysis
Splice - soil and pile structure interaction analysis for design of safe and solid foundations
Stofat - design of welded plates and shells
Fatigue design of welded plates and shells for wave fatigue loading. Avoid local structural failure due to repeated environmental loads.
Submod - refined sub-modelling
Quick and easy refined analyses - take a closer look at details and local effects. Refined sub-modelling including meshing and global displacement
Superintendent's Manual™
For Superintendents - By Superintendents
Superintendent’s Manual™ is a unique product offering best practices and up-to-date operational, technical and regulatory information to maritime players ranging from shipbuilders and training centres to professional ship managers.
Taro
Taro Downstream. Assessing process plant efficiency, availability and utilisation as a function of reliability, throughput and operations.
Trail
Assess performance of train services (timetable) over a prescribed period of time addressing infrastructure and train reliability, maintenance and logistics strategy and operation strategy.
Usfos - progressive collapse analysis
Usfos progressive collapse analysis - protecting health, safety and the environment is paramount for designers and operators of offshore platforms, particularly when such structures are subject to extreme loads.
Wadam - frequency domain hydrodynamic analysis
Wadam is a general hydrodynamic analysis program for calculating wave-structure interaction for fixed and floating structures of arbitrary shape.
Wajac - wave loads on slender structures
computes hydrostatic and hydrodynamic forces on fixed offshore frame structures due to wave and current, together with static or gust wind loads.
Wasim - time domain hydrodynamic analysis
Non-linear time domain hydrodynamic analysis of fixed and floating vessels with or without forward speed, including calculation of global motions and local pressure loading on the vessel.
Waveship - wave motions
Wave motions based on 2D strip theory of and loads on ships moving with forward speed.
Woad - Worldwide Offshore Accident Databank
40-years experience of worldwide offshore accident history is systemised and stored in DNV’s Worldwide Offshore Accident Databank - Woad.
Xtract - FE results presentation postprocessor
a high-performance general purpose model and results visualisation program. Xtract is the ideal tool for displaying, animating and presenting the results of your hydrodynamic and static/dynamic structural analyses.